Need help?Do you have a question about the AVer TR333V2 and is the answer not in the manual?
General| Image Sensor | 1/2.8" Exmor CMOS |
|---|---|
| Sensor Type | CMOS |
| Optical Zoom | 30x |
| Digital Zoom | 12x |
| Frame Rate | 60 fps |
| Preset Positions | 256 |
| Focus | Auto/Manual |
| White Balance | Auto/Manual |
| Exposure Control | Auto/Manual |
| Aperture | F4.7 (Tele) |
| Shutter Speed | 1/1 ~ 1/10, 000 sec |
| Video Output Resolution | 1920x1080 |
| Video Resolution | 1920 x 1080 |
| Video Output Interface | HDMI, IP |
| Pan Angle | +170° ~ -170° |
| Tilt Angle | +90° ~ -30° |
| Audio Input | Mic / Line in |
| Audio Output | 3.5 mm Line Out |
| Network Interface | RJ-45, 10/100/1000 Mbps |
| Control Interface | RS-232 |
| Power Supply | DC 12V |
| Field of View | 2.3° (Tele) |
| Interface | HDMI, RS-232 |
| Operating System Compatibility | Windows, Mac |
Details FCC compliance, limits, and user cautions for radio frequency interference.
Provides safety guidelines for handling and disposing of remote control batteries to prevent hazards.
Details available accessories that can enhance camera functionality or mounting options.
Describes the physical ports and components of the camera unit.
Explains the meaning of different LED colors and blinking patterns for status indication.
Diagrams various connection types including USB, LAN, and video outputs.
Details how to connect the camera using Power over Ethernet (PoE+) standard.
Instructions for attaching the cable fixing plate to manage cables.
Explains the purpose and operation of various remote control buttons.
How to access and navigate the On-Screen Display (OSD) menu for settings.
Steps to manually configure a static IP address for network access.
Guide to using IPCam Utility for discovering and accessing the camera.
Overview of the live video feed and control panel layout.
Detailed operations for camera pan, tilt, zoom, and focus controls.
Adjusting exposure modes, shutter speed, gain, and iris for optimal image quality.
Configuring network connection via DHCP or manual static IP assignment.
Enables automatic tracking of a presenter entering the camera's view.
Tracks presenters within pre-defined zones (preset areas) on the screen.
Combines Presenter and Zone tracking for flexible subject detection.
Procedures for updating camera firmware and restoring factory defaults.
A comprehensive table of RS-232 commands for VISCA protocol control.
To Next Page
