AVer TR333V2 - Remote Control Operation; Remote Control Functions

18
Remote Control
Name
Function
(1) Power
Turn the unit on/standby.
(2) Menu
Open and exit the OSD menu.
(3) Camera Select
CAM1 to CAM3 button
Select a camera to operate.
(4) Numeric Pad
 Use for setting the preset position 0~9.
 Press number button (0~9) to move the camera to pre-configured
preset position 0~9.
(5) Preset
Press “Preset” + “Number button (0~9)” to set the preset position.
(6) Reset
Press “Reset” + “Number button (0~9)” to cancel pre-configured preset
position.
(7) WDR
Turn on/off WDR function.
(8) BLC
Turn on/off backlight compensation.
(9)
Pan and tilt the camera.
(10) Enter
Access the OSD menu, confirm the selection or make a selection in OSD
menu.
(
11) PT Reset
Reset the Pan-Tilt position.
(12) L/R DIR
Left and right orientation setting.
- Press “L/R DIR” + “1” button to reset setting.
- Press “L/R DIR” + “2” button to move to opposite direction.
(1) (2)
(6)
(8)
(10)
(12)
(15)
(19)
(17)
(20)
(22)
(24)
(14)
(3)
(4)
(5)
(7)
(9)
(11)
(13)
(16)
(18)
(21)
(23)
▲,▼,◄, & ►