54
System
You can view the system information, or configure some system settings on this page.
Upgrade firmware: Follow below steps to upgrade the firmware.
1. Download the newest firmware from https://www.aver.com/download-center/ .
2. On the Web page, go to System > Upgrade firmware.
3. Click Choose File to select the firmware.
4. Click Upgrade to start upgrading the firmware.
5. Refresh the browser after the upgrade process is complete.
Factory Default: Clear all values and reset the camera back to factory default values.
Camera Information: Displays the camera information.
Login: The default login ID and password are admin/admin. To change the login ID and password,
input the new login ID and password and then click Change.
Language: Change the Web UI language.
Status OSD: Enable/disable to display the status info on the live view. When operating the Preset
(Save Preset, Call Preset, Cancel Preset), Zoom or Tracking functions, the status will be displayed
on the live screen.
Setting: Click Import Setting to import camera configurations. Click Export Setting to export
camera configurations.
Status Live View: Select On to display live view. Select Off to close live view.
VISCA Customized Function: Configure the settings and then click OK.
Power Up to Preset: If this function is enabled, after camera power-up, the camera will move to
the input preset position. To set up this function, input a preset position and then click Save.
Ensure the preset positions have been pre-configured before enabling this function.
To Next Page
Loading...
Need help?
General
