55
Power Off to Preset: If this function is enabled, when power-off the camera, the camera will move
to the input preset position. To set up this function, input a preset position and then click Save.
Ensure the preset positions have been pre-configured before enabling this function.
Sleep to Preset: Select a pre-configured preset point for the Sleep mode. When the camera
enters the Sleep mode, the camera will turn to the selected preset point.
Sleep Timer: Set up a duration for the sleep timer. When there is no UVC connection and timer is
up, the camera will enter the sleep mode. You can select Off to disable the sleep mode. To
perform this function, ensure to select USB Only in the Video & Audio > Video Mode setup field.
Turn on Auto Tracking when using USB Video: You can enable the Auto Tracking function
when using USB video. To perform this function, ensure to select USB Only in the Video & Audio
> Video Mode setup field.
To Next Page
Loading...
Need help?
General
