function and select “Off”.
[Notes]
Default is Manual Framing.
SmartFrame deploys face and
body detection technology. People
wearing masks and side facial
profiles can still be detected. The
maximum detection distance is
7~10 meters away from the
camera.
Camera will track people while
moving. It will start to focus and
zoom in once people stop moving
for 1~5 seconds, depending on the
framing speed you choose. The
default framing speed is “Middle”
speed. “High” speed is more
suitable for one person tracking.
Preset Framing: Set up preset
points in advance (Only for Preset
points 1~9. Preset 0 is for home
position). Camera tracks one
presenter and shoots the preset
areas instead of focusing and
zooming into presenter.
The Preset button on the remote
serves 2 functions.
To Save a Preset – Move camera to
desired position. Press and hold the
preset button until you receive the
save message on the screen. Select
preset position button 0-9 to store the
current camera position. Repeat steps
if needed.
To Load a Preset - Press the preset
To Next Page
Loading...
