21
Presenter
Select the “Presenter” tab in Tracking Settings interface.
Camera will start tracking when object enters the tracking point.
1. Use , , , , and to adjust the camera to tracking point.
2. Then, select Save to Preset 1 to save the tracking point.
3. Tracking Sensitivity: sets the sensitive level of tracking. Move bar to set the value. The current
value is displayed at upper right corner.
4. Time of Return to Tracking Point: sets the idle time for camera return to tracking point. Move bar
to set the value. The current value is displayed at upper right corner.
5. People Size: selects the people in full or upper body while tracking.
[Note] Tracking point under presenter mode: default set is preset 1. When preset 1 is not set, tracking
point is home position.
To Next Page
Loading...
