24
Camera Settings
Camera Control
The user can set up camera control (zoom in/out, camera direction control, focus, pan/tilt/zoom speed),
and enable/disable digital zoom function.
Preset
Set up preset position and view preset position.
1. Select the “Preset” tab in Camera Settings interface.
2. Use , , , and to adjust camera view position.
3. Enter preset position number (0~255) in Save Preset column and select “Save” to save the
position.
4. To call the preset position, enter a preset number (0~255) in Load Preset column or select the
preset number (0~19) from Quick Call section.
5. Video Freeze while Preset: turns on/off the screen view freeze function. When “Video Freeze
while Preset” is on, during the preset operation, the screen will freeze until the operation is done.
6. Preset Speed:
selects the preset speed.
To Next Page
Loading...
