27
Network
Set up IP address of camera – DHCP or static IP, Netmask, Gateway, and DNS. After setting, select
“Confirm” to apply settings.
Follow below steps to set up RTMP:
1. Get the RTMP server URL and stream key from the broadcasting platform and enter in “Server
URL” and “Stream Key” column.
2. Select “Start Stream” to begin uploading the live video of the camera to the broadcasting
platform.
3. Select “STOP” to stop uploading the video.
[Note] To get the RTMP server URL and stream key, please refer to the instruction of broadcasting.
RTSP Security for user to set a security key number for streaming.
To Next Page
