3. Press “LAN Configuration”.
4. And In the drop-down list “Obtain IP address”,
choose “Static IP”, “DHCP”, or “PPPoE”.
- Static IP: Input the “IP address”, “Subnet
Mask” and “Default Gateway”.
- DHCP: Configure the system to automatically
obtain an IP address from the DHCP server.
5. Select “Apply” and press (Enter).
6. Press (Back) on the remote to return to
previous menu. (If you have H.323 ALG enabled,
skip to step 9).
7. In the Network page, go to “Firewall” and press
(Enter).
8. Select “ON” in the NAT check box and enter the
IP address in the “NAT Public (WAN) address”
field.
9. Press the “Home” button on the remote to return
the home menu.
10. Press the Call button on the remote and
you are ready to make your first call.
To Next Page
Loading...
