78
VLAN
Enable VLAN:
Enable/disable VLAN function.
A virtual LAN (VLAN) is any broadcast
domain that is partitioned and isolated in
a network at the data link layer.
VID
: Enter port for VLAN.
Priority
: Assign VLAN packet’s priority.
Click
Apply
to save and active the settings.
Firewall
Configure the following items to setup the Firewall.
Select
Network
│
Firewall
and press .
Configure the following relative items to setup
the Firewall.
TCP/UDP Ports
By default, the system communicates through
TCP/UDP ports in the range from 30000 to
30299. You can specify the range for your
specific network environment.
You must configure your firewall to allow inbound/outbound traffic through “UDP (port 1719)”/ “TCP
(port 1720)” for H.323 call setup.
To Next Page
Loading...
