AVer EVC170 - Hang up the Call; Video Layout

32
Hang up the call
1. When in multi-point call conference, press
button(Hang up) on remote control
and a call-point list screen is pop-up.
2. Use the ▲ and ▼ buttons to select which
you want to disconnect and press . To
end the meeting, select Disconnect All.
3. You will notice the site names in the
meeting are color coded. If you are not sure
of which name you want to disconnect, refer
to the color of the frame.
4. In multiple call conference, you can choose
to hang out which call.
Video Layout
Video layout on multisite connections is shown as following figure.
When only 2 points connection with content sharing, user can have 7
th
layout to choose which screen layout
shows content sharing and far sit view only.