AVer EVC170 - Iscsi; Webrtc

92
iSCSI
Select
Network
│
iSCSI
and press .
To connect to iSCSI server on network.
Enter the iSCSI server’s
IP
,
Port
,
Target Name
,
Username
, and
Password
.
Select “
Connect
” to make a connection to iSCSI
server. To disconnect, select “
Disconnect
”.
After connecting, the total capacity and used
capacity will be display.
Mark “
Enable iSCSI after power on
”, the iSCSI
will be connected when EVC unit is power on.
WebRTC
EVC supports WebRTC (Web Real-Time Communication) for the real-time communication over
peer-to-peer connections.
Select
Network
│
WebRTC
and press .
Enable/Disable WebRTC function.
Wss port
and
Ws Port
setup is at WebTool
setup page.
WebRTC Https UI
and
WebRTC
WSS URL
information are display on WebTool
page, too.
[Note]
1. WebRTC function is not a standard support
in EVC system. User needs to purchase the
license to update for WebRTC function.
Please contact your dealer for license
purchasing.
2. WebRTC function only support for Chrome
and Firefox browser.
3. Please set Chrome or FireFox browser as
your default browser.
4. For the first time using WebRTC to join the
meeting, the Wss authentication supports
URI is required. The Wss authentication will
be different that depends on the browser user
is used.
5. If Wss authentication is failed, please clear
the history of browser and do the Wss
authentication again.