83
Enable STUN Server
Mark to enable STUN server function.
SIP Configuration
A typical SIP session involves a client requesting a session with a SIP server. After the request is
received, the SIP server returns a response to the user indicating the availability of the session.
1. Select Network
│
SIP Configuration and press
.
2. Configure the following relative items to setup
the Server.
Operating Mode
Select Operating Mode and press to select
the mode from drop-down list.
Become a Client:
Register EVC main system to
SIP external server.
Become a Server:
Set EVC main system as a
SIP server.
[Note]
Only allow the users are registered on
EVC SIP server can make a connection.
OFF:
To deactivated using SIP.
To Next Page
Loading...
