59
Monitor
EVC main system allows you to connect dual monitor. In the
Monitor
configuration screen, you can
configure the
Aspect Ratio
and
Screen Saver
to each monitor.
Select General Setting
│
Monitor and press .
Select the VGA Display Resolution (Auto
/4:3/16:9) that you want from the drop-down list
and press . If you want the system to detect
the right setting automatically, please select
“Auto”
.
Select the Screen Saver time (OFF/10
Minutes/20Minutes/30Minutes/60Minutes) from
the drop-down list and press . You can
select
“OFF”
to disable this function or define a
standby mode time.
The screen will turn black when the system is in standby mode. Press any button on the remote
controller to wake up the system.
TV Underscan
For older type TVs/CRT monitors, this function
can help to auto adjust screen view when the
GUI is exceeded the monitor view range.
To Next Page
Loading...
