30
Dial
Dial selection allows you to enter dial screen and
make a call.. Press button on the remote
controller has the same effect.
Call to
Use the number keys on the remote controller to
enter the IP address or number or SIP URI
(sip:username:password@host) you want to call.
AVer remote controller supports alpha-numeric
operation, press numeric key multiple times to
select the alphabet or symbol.
[Note]
Press button and hold can switch
between numeric mode(123) and alphanumeric
mode(ABC/123).
Call Type
AVer EVC supports H.323, SIP, SIP Only Voice
calls. H.323 is commonly used to communication
to other videoconferencing room systems. SIP is
commonly used to communicate with other VoIP
devices. SIP Only Voice is used when other
conference site could not recognize EVC video
code, only transfer voice. Use the button to
select which type of call type you want to make
then press to confirm.
[Note]
H.323 and SIP call type can be existed in
a same conference call meeting.
To Next Page
Loading...
