50
Default Call Quality
EVC main system supports 64K,128k, 256k,
384k, 512k, 768k, 1024k, 1152k,
1472k,
1536k,
1920k, 2048k , 3072k, 4096k selection for
default call quality. By default, it is set to 512k.
Enable/Disable AES
Advanced Encryption Standard (AES) encrypts
the data that is being transmitted during a video
conferencing to provide protection against
unauthorized data access. Encrypted data can
only be read with the device that also supports
the AES standard. All parties on the call must
support AES to use this feature, or else the data
will not be encrypted.
Select
General Setting
│
Call Settings
and
press . Select the
Enable AES
check box to
active this function.
This function may be restricted and unavailable in some countries.
Enable/Disable QoS
Quality of Service (QoS) provides different
priority data flows to guarantee a certain level of
performance in video conferencing data flow. To
activate QoS, select
General Setting
│
Call
Settings
and press . Select the
Enable QoS
check box to active this function. By default, this
function is disabled.
To Next Page
Loading...
