Avermedia EzRecorder 310 - Page 17

16
Step 1
Selecting Language
When the welcome page appears, use ▲/▼ to
select your preferred language. Press OK to
confirm.
Step 2
A/V Pass-Through
It is advised to turn ON A/V pass-through.
Step 3
Reminder
Make sure an NTFS-formatted hard drive is
connected or installed to the device.
Check the connection of network.
Press OK to start setup.
A router which supports DHCP IP network is
recommended. Also, refer to Ch. 6.2 for manual
connection setup.