Avermedia EzRecorder 310 - Parts and Ports Overview; Control Panel and Indicators

4
Chapter 2 Parts and Ports
2.1 Control Panel
The button panel found on the front of the unit provides quick access to commonly used functions.
1
Record
Press to start / stop recording.
Hold down the button for four seconds to force shut down EzRecorder 310.
2
Power
Press to turn the unit on.
2.2 Infrared Sensor
When using the remote control, aim it at the infrared (IR) sensor located at the front panel of the unit.
The remote control must be held at an angle within 30 degrees perpendicular to the IR sensor to
function correctly. The distance between the remote control and the sensor should not exceed 6 meters
(20 feet).