Chapter 3: Remote Operation 27
Adjusting Mic Preamp
Controls
To adjust a control on a single channel:
1 Choose View > Mix Window Views > Mic Pre-
amps
.
2 Click the Mic Preamp control that you want to
adjust.
Adjusting Controls on
Multiple Pro Tools | PREs
When working with PRE controls on multiple
channels in Pro Tools, you must select tracks from
within Pro Tools. Pro Tools does not register se-
lections from the PRE front panel.
To adjust PRE controls on multiple channels:
1 Hold Shift and select the tracks whose PRE con-
trols you want to adjust.
2 Hold Shift+Option (Mac) or Shift+Alt (Win-
dows) and adjust PRE parameters on any se-
lected track.
Adjustments made to any control on a selected
track are made to the corresponding controls on all
selected tracks.
To adjust controls on all channels:
Hold Option (Mac) orAlt (Windows) and adjust
PRE controls on any track.
Mic Preamp Remote Control
with Control Surfaces
Pro Tools systems configured with PRE remote
control and a supported control surface can use the
control surface to control one or more Mic Pre-
amps in Pro Tools.
For instructions, see the guide for your work sur-
face (D-Control or D-Command) or control sur-
face (such as C|24 or Command|8).
To Next Page
Loading...