Avid Technology Pro Tools - Page 49

Chapter 7: Automation and Mixing 45
Send Level
To show Send level automation in the Edit window:
1 Press the AUX key (MC Mix) or the SENDS Soft Encoder (MC Control) to bring sends to the encoders.
2 If necessary, press the PAGE > key until the desired Send slot is displayed.
3 Hold Control+Command (Mac) and touch the Send encoder in the desired track.
Send Pan
To show Send pan automation in the Edit window:
1 Press the AUX key (MC Mix) or the SENDS soft Knob (MC Control) to bring sends to the encoders.
2 If necessary, press the PAGE > key until the desired send slot is displayed.
3 Press the encoder for the desired send.
4 Hold Control+Command (Mac) and touch the Send pan encoder on a track.
Plug-In Automation
Showing Plug-in Automation
To show automation for a continuous plug-in parameter:
1 Press the INSERTS key (MC Mix) or the INSERTS Soft Knob (MC Control).
2 Display the desired plug-in parameter using the encoders and <PAGE> keys. (See “Working with
Plug-in Inserts” on page 33.)
3 Hold Control+Command (Mac) and touch the encoder for the desired plug-in parameter.
To show automation for a switch-type plug-in parameter on MC Control:
1 Press the INSERTS Soft Knob.
2 Display the desired plug-in parameter using the encoders and <PAGE> keys. (See “Working with
Plug-ins on MC Control” on page 33.)
3 Hold Control+Command (Mac) and touch the plug-in parameter in the Touchscreen.
To do to all selected tracks, hold Shift+Option+Control+Command (Mac) and touch the Send encoder
on a selected track. To do to all tracks, hold Option+Control+Command (Mac) and touch any Send en-
coder.
To do to all selected tracks, hold Shift+Option+Control+Command (Mac) and touch the Pan encoder
on a selected track. To do to all tracks, hold Option+Control+Command (Mac) and touch any Send
pan encoder.