Avid Technology Pro Tools - Page 50

Artist Series and Pro Tools46
To show automation for a switch-type plug-in parameter on MC Mix:
1 Press the INSERTS key.
2 Display the desired plug-in parameter using the encoders and <PAGE> keys. (See “Working with
Plug-ins on MC Control” on page 33.)
3 Hold Control+Command (Mac) and touch the encoder.
Enabling All Plug-in Parameters for Automation
To enable all plug-in controls for automation on MC Control:
1 Press the INSERTS Soft Knob.
2 Hold Control+Command+Option (Mac) and touch the desired plug-in in the Touchscreen.
To enable all plug-in controls for automation on MC Mix:
1 Press the INSERTS key.
2 Hold Option+Control+Command (Mac) and press the ON key (in the encoder row) for the desired
plug-in.