Need help?Do you have a question about the Avid Technology Pro Tools SYNC HD and is the answer not in the manual?
Details the features of SYNC HD, including supported sources and outputs, and integration with Pro Tools.
Lists requirements for using SYNC HD with Pro Tools, including hardware and cables.
Details the primary hardware connections for the SYNC HD, including power and interface connections.
Explains the serial connection between SYNC HD and Pro Tools systems for communication.
Covers SYNC HD's limited Serial Deck Control and 9-Pin Remote Deck Emulation modes.
Instructions for updating the SYNC HD firmware using the Avid DigiTest application.
Troubleshooting steps for lost communication between Pro Tools and SYNC HD.
Tips for resolving drift or inaccurate synchronization issues between devices.
Overview of the SYNC HD front panel controls and displays.
Detailed description of the front panel controls and displays on the SYNC HD.
Explains the function of the Clock Reference switch and associated LEDs.
Describes how to select the positional reference source using the front panel switch.
Describes the accessory port for Bi-Phase, Tach, GPI, and Pilot signals.
Details the Video Ref input for receiving video signals for clock reference.
Explains the bidirectional Host Serial port for connecting to a computer.
Accessing SYNC HD controls via Pro Tools Session Setup or Peripherals dialog.
Accessing SYNC HD controls via the front panel in Standalone mode.
Table comparing controls available in Pro Tools vs. the SYNC HD front panel.
Explains the three primary functions of the Set switch.
Describes using the Down and Up switches to scroll through parameters and values.
Details the functions of the Run/Stop/Clear/Esc switch in different modes.
Details how to fine-tune speed and pitch using SYNC HD's internal clock.
Setting the starting frame address for Bi-Phase/Tach positional reference.
Configuring the direction for Bi-Phase/Tach input signals.
Details the features of SYNC HD, including supported sources and outputs, and integration with Pro Tools.
Lists requirements for using SYNC HD with Pro Tools, including hardware and cables.
Details the primary hardware connections for the SYNC HD, including power and interface connections.
Explains the serial connection between SYNC HD and Pro Tools systems for communication.
Covers SYNC HD's limited Serial Deck Control and 9-Pin Remote Deck Emulation modes.
Instructions for updating the SYNC HD firmware using the Avid DigiTest application.
Troubleshooting steps for lost communication between Pro Tools and SYNC HD.
Tips for resolving drift or inaccurate synchronization issues between devices.
Overview of the SYNC HD front panel controls and displays.
Detailed description of the front panel controls and displays on the SYNC HD.
Explains the function of the Clock Reference switch and associated LEDs.
Describes how to select the positional reference source using the front panel switch.
Describes the accessory port for Bi-Phase, Tach, GPI, and Pilot signals.
Details the Video Ref input for receiving video signals for clock reference.
Explains the bidirectional Host Serial port for connecting to a computer.
Accessing SYNC HD controls via Pro Tools Session Setup or Peripherals dialog.
Accessing SYNC HD controls via the front panel in Standalone mode.
Table comparing controls available in Pro Tools vs. the SYNC HD front panel.
Explains the three primary functions of the Set switch.
Describes using the Down and Up switches to scroll through parameters and values.
Details the functions of the Run/Stop/Clear/Esc switch in different modes.
Details how to fine-tune speed and pitch using SYNC HD's internal clock.
Setting the starting frame address for Bi-Phase/Tach positional reference.
Configuring the direction for Bi-Phase/Tach input signals.
General| Sample Rate Support | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
|---|---|
| Frame Rates | 23.976, 24, 25, 29.97, 29.97 DF, 30, 30 DF fps |
| Sync Modes | LTC, VITC, Word Clock |
| Clocking | Yes |
| Clock Reference Inputs | Word Clock, Video, LTC |
| Clock Reference Outputs | Word Clock |
| Connectivity | LTC, word clock |
| Time Code Support | LTC, VITC |
| Compatibility | Pro Tools HD |
| Dimensions | 1U rackmount |
To Next Page
