Avision AP40 Plus Series - Page 35

User’s Guide
26
Setting the Product’s Date and Time
When using this product for the first time, the LCD screen will display the setting of
[Date and Time] after turning on the product. Please follow the steps below to
complete the setting of the date and time of this product. Otherwise the product
cannot be operated.
1. Enter the current date. For example: input the current date as [2015-01-01]
(year-month-day), use the left and right keys to move the cursor to the position
you need to enter, and then press the Up and Down keys to increase or decrease
the number, and finally press "OK" to save the setting.
2. If the format is correct, the screen will display [Setting OK].
3. Press the Down key to scroll down to the time setting. Enter the current time as
[08:25] (hour: minute). Use the left and right keys to move the cursor to the
position you need to enter. Then press the Up and Down keys to increase or
decrease the number. Finally press the "OK" key to save the settings.
4.
If the format is correct, the screen will display [Setting OK].
Date
2015-01-01
Date
2022-04-04
Setting OK
Time
00:00
Time
14:04
Setting OK