User’s Manual
8.6 Replacing the ADF Friction Roller
After scanning approximately *100,000 pages through the ADF,
the ADF Friction Roller may be worn out and you may experience
problems with document feeding. In this case, you may need to
replace a new ADF roller. For ordering the ADF roller, please
consult your nearest dealer and follow the procedure below to
replace it.
Disassembling Procedure
Press the
1. Press the ADF Release button.
2. Gently open the ADF Front Door to the left.
3. Hold the mylar assembly with your fingers and then lift it up
as illustrated in below.
4. Press the right end of the Friction Roller externally to detach
it from the slot and then detach the left end from its hole.
To Next Page
Loading...
