Avision FF-2009B - 3.1.2 Loading Your Document in the ADF Paper Tray

User’s Manual
3-2
3.1.2 Loading Your Document in the ADF Paper Tray
Fanning Your Document
NOTE:
To avoid occasional multi-feeds or paper jams, please fan
your documents and align the top edges before feeding
them into the scanner.
1. Hold both ends of the documents and fan them a few
times.
2. Rotate the documents by 90 degrees and fan them in the
same manner.
3. Align the edges of the documents in a step-like pattern
(see picture below).
Step-like
Scanning
Direction