Avision FF-2009B - Page 76

User’s Manual
4-27
To rename a profile,
 From the Image tab dialog box, click “Profiles” to prompt
the Edit Your Profile dialog box.
 Choose the profile you want to rename from the
dropdown list box and then click the Rename button.
 Enter new name for the profile.
 Choose “Save” to save the new profile or “Cancel” to quit.
NOTE:
 The preset default profiles include Flatbed,
Simplex-B&W, 200 dpi, Simplex-Gray, 200 dpi,
Simplex-Color, 200 dpi, Duplex-B&W, 200 dpi,
Duplex-Gray, 200 dpi, Duplex-Color, 200 dpi. If
you have a simplex or a sheetfed scanner, the
duplex or the flatbed option will not be available.
 If any setting for a current profile has been
changed, a [*] sign will be marked before the
name of current profile, for example, [* Duplex,
Color, 200 dpi]. If desire, click the [OK] or
[Scan] button and a dialog box will be prompted
to let you save the new profile.