User’s Manual
The Adjustment option is available when Automatic is
selected.
Adjustment —adds a positive/negative margin value
Top/Bottom or toward left/right of the image. Adjustment
is used when the automatic document feeder is used.
Adjustment reduces the possibility of corner clipping on
skewed images. To set Adjustment values, use the UP/Down
buttons to select where you want to apply Adjustment
values: Top/Bottom or Left/Right, and then select the
amount of inches/mm/pixels applied. Select a value within
the range of 0.00 to 1.00 / -1.00.
To Next Page
Loading...
