Avive AED - Step 3: Stand Back - Automated Analysis & Treatment

IFU-00367 Rev A
13
Step 3: Stand Back - Automated Analysis & Treatment
a) Heart Analysis
Once the pads are placed on the patient’s bare skin, stand back and
do not touch the patient. The Avive AEDä will automatically analyze
the patient’s heart rhythm to diagnose whether or not a
defibrillation shock is needed.
DO NOT TOUCH PATIENT
b) Automated Treatment
If the Avive AED determines that a shock is required, the AED will
automatically deliver a defibrillation shock to the patient. Stand back
and do not touch the patient.
DO NOT TOUCH PATIENT
IMPORTANT: The Avive AED will provide you audible instructions and
stop flashing the Stand Back Lights when it is safe to touch the
patient.
c) Perform CPR
After automated analysis and treatment (if needed), the Avive AED will audibly instruct you that it is safe to
touch the patient and to perform CPR. The device will provide hands-only CPR instructions. The Avive AED will
instruct you when to stop CPR so that it can re-analyze the patient’s heart rhythm and deliver treatment (if
needed).
NOTE: Continue following instructions from the Avive AED until the patient regains consciousness or Emergency
Medical Services arrive and take over care of the patient.
After the emergency situation has been resolved, make sure to maintain the Avive AED and accessories [See
Section 8A].