Avive AED - Device Readiness; Device Self-Tests; Status Light Indicators

IFU-00367 Rev A
17
6. Device Readiness
A. Device Self-Tests
The Avive AEDä performs daily, weekly, and monthly internal self-tests to check device readiness. The Avive
AED indicates device readiness via the Status Light [See Section 6B] and Speaker [See Section 6D].
B. Status Light
The color of the Status Light indicates the functionality status as illustrated below. The flashing behavior
indicates the battery charging state.
The status of the Avive AED should be checked periodically to ensure it is ready for emergency use. In addition
to checking the Status Light on the Avive AED, the device status may also be checked through a variety of
compatible Aviveä products. For the full list of supported compatible products, visit www.avive.life/products.
Ready to Use
If the Status Light is blinking green, your device is ready to
use in an emergency.
Device Needs Attention!
If the Status Light is blinking red, or the device is beeping,
then your device needs attention! Press and hold the Power
Button for 5 seconds and the Avive AED will tell you what is
wrong.
Ready to Use
Needs Attention
Battery
Charging
Status Light blinks once every
second
!"#$%&'(1s
!"#$%&'(1s
Battery
Fully Charged
Status Light quickly blinks twice
every 10 seconds
!"#$%&'(10s
!)*+,-./10s
Battery
Not Charging
Status Light blinks once every
10 second
!"#$%&'(10s
!)*+,-./10s