Avive AED - Initial Device Setup; Setup Steps

IFU-00367 Rev A
8
3. Initial Device Setup
Step 1: Remove the Avive AEDä from the packaging.
Step 2: Press the Power Button. The Avive AED will run some initialization self-checks to make
sure it is ready to go. You will be prompted to press the Child Button and Español Button to
ensure they are functioning properly.
Once initialization is complete, the Avive AED will prompt you to press the Power Button to
power off the AED.
Step 3: Connect the device to the Aviveä USB Power Adapter with the Avive USB Charging
Cable to charge the battery. [See Section 8A]
After you’ve followed the steps above, your device should be ready to help save a life!
Account Setup
Be sure to set up an account and register your device for device tracking, product warranty, and the full
benefits of the Avive platform. Visit www.avive.life/register or install the Avive App on your smartphone to get
started.
Tracking Requirements
Avive Solutions, Inc. is required to track each Avive AED per U.S. medical device regulations.