AVM Fritz!Box User Manual

Installing FRITZ!Box in Windows Me
16 FRITZ!Box – 2 Starting FRITZ!Box Operation
Installing FRITZ!Box in Windows Me
Insert the FRITZ!Box CD in your CD-ROM drive to start the In-
stallation Help automatically. Follow the instructions in the
Installation Help to install FRITZ!Box at your computer’s USB
port.
Perform the following steps to install FRITZ!Box without using
the Installation Help:
1. Connect FRITZ!Box to the power supply and to DSL as
described on page 13.
2. Start the computer and then insert the FRITZ!Box CD.
3. Connect FRITZ!Box to the USB port. The USB cable has
two different plugs: one is flat and rectangular and the
other is square.
Pick up the USB cable and insert the flat plug into a free
USB port on your computer.
4. Then insert the square connector into the socket la-
beled “ ” on FRITZ!Box.
Connecting FRITZ!Box to the USB port of a computer
FRITZ!Box
USB cable
FRITZ!Box-e.book Seite 16 Donnerstag, 8. Juli 2004 9:37 09

AVM Fritz!Box Specifications

General

DSL Standard	VDSL2, ADSL2+
VoIP	Yes
DECT Base Station	Yes
Type	Modem/Router
Wireless Standard	Wi-Fi 6 (802.11ax)
Annex Types	Annex A, Annex B
USB Ports	2
Ethernet Ports	4
Ports	1 x DSL
Frequency Band	2.4 GHz, 5 GHz
Security	WPA3
Power Supply	External power adapter