FRITZ!WLAN USB Stick 12
As soon as you connect the FRITZ!WLAN USB Stick to your
computer, the security settings of your WLAN are imple-
mented in the FRITZ!WLAN control software and then delet-
ed from the FRITZ!WLAN USB Stick. The AVM Stick & Surf
log
o
appears and a WLAN connection to your FRITZ!Box is
established automatically.
If you are using a FRITZ!Box without a USB port or a device
from a third-party manufacturer as a WLAN access point,
you can still use WPS (Wi-Fi Protected Setup) or enter the
network key manually to establish a secure WLAN connec
-
tion. For more information, see the section “WPS (Wi-Fi
Protected Setup)” from page 38 and the Help on the
FRITZ!WLAN control software, which is available as soon
as
y
our FRITZ!WLAN USB Stick has been installed.