FRITZ!WLAN USB Stick 9
1.4 Technical Specifications
LEDs 2 for display of connections and activity
USB port USB version 2.0, compatible with USB 1.1
with reduced data throughput
WLAN module Support for radio network in accordance with
IEEE 802.11n
IEEE 802.11g and
IEEE 802.11b
Frequency band 2.4 GHz
Encryption WPA (Wi-Fi Protected Access) /
WPA2 (802.11i) /
WEP 64-/128-bit (Wired Equivalent Privacy)
Antennas integrated
Operating systems supported Windows 8 (32-bit or 64-bit edition)
Windows 7 (32-bit or 64-bit edition)
Windows Vista (32-bit or 64-bit edition)
Windows XP (32-bit or 64-bit edition)
Dimensions (W x D x H): approx. 40 x 20 x 10 mm
Weight approx. 10 g
Power supply powered by USB, no external power supply
required
Maximum power consumption: 1.35 W (transfer)
Transmitter power max. 76 mW
Receiver sensitivity min. -101 dBm
Supported data throughput
rates (gross)
802.11n up to 150 Mbit/s*
802.11g up to 54 Mbit/s*
802.11b up to 11 Mbit/s*
* The user data rate that can actually be achieved is
somewhat below the specified value (see the table on
“Standards” on page 33).
Firmware can be updated
Channels 1 through 13 (ETSI)
Ambient temperature
(during operation)
-5 to 45°C