AVG Series User Manual | 25
OPS Module
Your Avocor AVG series is compatible with any Open Pluggable Standard (OPS) computer module.
Installing an Avocor OPS module is a relatively simple process, but one that still
needs a level of care and attention. Improper installation may cause malfunction or even damage the
OPS module or the OPS Slot-Connector on the display. Please follow these instructions carefully.
OPS INSTALLATION STEP-BY-STEP
I. Turn off the main power switch for the AVG series display.
II. Remove the screw of the handle on the display input panel
III. Turn the handle clockwise direction gently