Enter your license key in the license field and click SAVE. Refresh the webpage or login and out again to
see this feature.
Attributes
Figure 41: WebGUI > SYSTEM > Attributes
Specifying a specific device name to be displayed in the OSD can be useful when using multiple cameras on the
same LAN. The Device-ID is always 1 (addressing is done via IP). The language cannot be changed. Click SAVE to
apply your settings. A small confirmation dialogue appears in the bottom right corner.
Make sure these settings don’t interfere with other uses and services on the same network, especially for the
ONVIF protocol that does not accept spaces in the camera name.
Time
Figure 42: WebGUI > SYSTEM > Time
Here you have the option to manually configure the time and date or synchronize it via a computer or an external
server within the Local Area Network (LAN) or Wide Area Network (WAN). Click SAVE to apply your manual
settings, or SYNC to synchronize the time and date.
User
Figure 43: WebGUI > SYSTEM > User
45
To Next Page
Loading...
