MAIN MENU
34
DDNS
You need to additionally set DDNS when your network type is PPPOE or DHCP.
We have our own DDNS server for quick DDNS service configuration. You don’t need to additionally apply a
DDNS service.
To use our own DDNS server, select “eagleeyes” in “SYSTEM NAME”.
The default host name is the MAC address of the DVR.
Then, note down the whole address under “CURRENT HOST ADDRESS”, such as
MAC000E53ECA7B4.ddns.eagleeyes.tw. This is the default IP address used to access your DVR remotely.
Note: Please at least use the default address to access your DVR remotely once. This is to ensure our
DDNS server has your DVR registered. Then, you may change the host name to a more
meaningful name to memorize later here.
(Optional) Enter your email address to receive our DDNS server notification if any.
Note: If you want to additionally apply a DDNS service instead of using ours, please refer to
www.surveillance-download.com/user/CMS.pdf and check “Appendix 2” for details.
ADVANCED CONFIG
CAMERA WAN FTP E-MAIL
DDNS
DETECTION DDNS ON
ALERT SYSTEM NAME eagleeyes
NETWORK HOST NAME MAC000E53ECA7B4
DISPLAY EMAIL EMPTY
RECORD
DEVICES
DCCS
IVS
NOTIFY
CURRENT HOST ADDRESS
EXIT MAC000E53ECA7B4.ddns.eagleeyes.tw
5.4.5 DISPLAY
ADVANCED CONFIG
CAMERA FULL SCREEN DURATION 03
DETECTION QUAD SCREEN DURATION 03
ALERT CALL SCREEN DURATION (For selected models only) 03
NETWORK DISPLAY COVERT ON
DISPLAY HDD DISPLAY MODE REMAINING SIZE
RECORD DISPLAY OUTPUT AUTO
DEVICES
DCCS
IVS
NOTIFY
EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) QUAD SCREEN DURATION
Select the quad screen dwell duration time in second (03 / 05 / 10 / 15).
3) CALL SCREEN DURATION (For selected models only)
Select the duration time in second for the CALL monitor function (03 / 05 / 10 / 15).
4) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” When covert recording is activated in
“CAMERA”.
To Next Page
Loading...
Need help?
General
