Axell Wireless Optical Master Unit Mark II - Features

AXELL OPTICAL MASTER UNIT MARK II
PRODUCT DESCRIPTION AND USER’S MANUAL
2 Doc PN 00018UM Rev. 1.9 © Axell Wireless Ltd
1.1 Features
• Wideband frequency range support - supports Cellular 2G, 3G, 4G services up to 2700MHz and
public safety services FM/VHF/UHF/LMR in one enclosure
• Supported Remote units – MBF-20 (low power), MBF-40 and BSF-3604 (high power)
• Modular, scalable, highly customizable system
• Flexible configuration to support up to 8 sectors via single chassis as well as MIMO and SISO
installations
• Single enclosure to support high power (MBF-40/BSF-3604) and low power (MBF-20) remote
units:
o Up to 24 MBF-20 remote units connected to a single OMU II unit
o Up to 8 high-power remote units (MBF-40 or BSF) connected to a single OMU II
unit
o Various combinations of both high-power and low-power remote units as detailed in
section 1.5
• WDM technology (Wavelength Division Multiplexing) – single fibre connection to each Remote
unit
• Automatic Optical Loss Adjustment – system initiated pilot tones sent between the OMU II and
each of its remote units are used to automatically determine the fibre loss and perform the
necessary adjustment for each link
• One or two (for redundancy) power-supplies (115-240V AC operation or DC 48V)
• Management and control options:
o Hosted fibre-optic remote units are managed and controlled via the OMU II (through
fibre communication)
o Auto detect of connected Remote units
o Local setup via Ethernet (or via USB port)
o Ethernet or wireless modem connection (optional) for remote management
o A range of supported modems including: GSM, WCDMA, CDMA 1x, PSTN
o SNMP v1/v2c support