AXELL OPTICAL MASTER UNIT MARK II
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd Doc PN 00018UM Rev. 1.9 1
1 Introduction
Axell OMU II is a scalable, flexible and remotely manageable fibre-to-optic conversion system
designed to provide media conversion and single source management capabilities for Axell high-
power and low-power fibre-fed Remote units. OMU II is a head-end system that acquires the RF
signal(s) from an external source, such as base station(s) or an off-air device, and converts the RF
signal into light signals for routing via optical fibres to remote Axell devices.
Depending on the model and the physical configuration, OMU II can support up to eight sectors
(where support for more than two sectors requires the use of Axell’s Point Of Interface (POI) unit in
conjunction with the OMU II).
OMU II can provide single source remote Web access commissioning and monitoring via a range of
remote modems or an Ethernet connection, where the hosted remote units are be monitored and
managed via an OMU II session.
To Next Page
Loading...