Need help?Do you have a question about the Axell Wireless Optical Master Unit Mark II and is the answer not in the manual?
Lists the key capabilities and characteristics of the OMU II system, including frequency range and supported remote units.
Describes the system's structure and how components are interconnected for RF to optic conversion.
Details available OMU II models and their corresponding ordering codes for different needs.
Explains the function and use of the Point-of-Interface unit for sector management.
Shows valid combinations of high-power (MBF-40/BSF-3604) and low-power (MBF-20) remote units.
Illustrates a configuration example supporting up to 24 MBF-20 remote units.
Shows an installation with up to eight high-power remote units using a POI unit.
Details the various modules that can be inserted into the OMU II chassis slots.
Describes the rear panel connections for power supply and RF sources.
Addresses problems and solutions for remote communication issues.
Explains the status and error indicators for different OMU modules.
Details configurations for OMU II with MBF-20 remotes.
Covers the process of replacing OMU I units.
Configuration for single sector with eight high-power remotes.
Configuration for two sectors with eight high-power remotes split evenly.
Configuration for two sectors with eight high-power remotes split unevenly.
Details OMU II solutions for USA market with external POI.
General guidelines for maintenance procedures.
Details scheduled maintenance tasks for the unit.
Instructions for the safe and responsible disposal of the product.
General steps for cleaning fiber optic connectors and cables.
Specific instructions for performing dry cleaning of fiber optic components.
Specific instructions for performing wet cleaning of fiber optic components.
General| Brand | Axell Wireless |
|---|---|
| Model | Optical Master Unit Mark II |
| Category | Network Hardware |
| Language | English |
To Next Page