AXIOMATIC AX140900 - Version History

UMAX140900. Ethernet to CAN Converter. Version 5 Page: 34-35
10 VERSION HISTORY
User
Manual
Version
Firmware
version
Date
Author
Modifications
-
-
Sept.
13, 2021
Amanda
Wilkins
Added ISO13766-1:2018 compliance.
5
5.xx
January
8, 2020
Olek
Bogush
Added 666.6(6) kbit/s baud rate.
Added CAN Assistant – Visual support of the converter.
4A
4.xx
Sept 24,
2018
Olek
Bogush
Added Accessories subsection.
4
4.xx
July 31,
2018
Olek
Bogush
Added CAN ID range and mask filters. Updated website
to support CAN filtering.
Added a discovery port number in Converter Discovery
and Ethernet Configuration.
Updated General Specifications. Added RoHS Directive.
Updated Vibration, Shock, and EMC compliances.
Updated Third Party Software License Notices. Other
small updates throughout the manual.
Updated Finnish office phone number on the front page.
3
3.xx
Nov 15,
2016
Olek
Bogush
Added Firmware Update and Converter Discovery
Sections. Added description of the AxioDisc.exe
application and the CAN-ENET Software Support
Package.
Updated web browser screenshots that did not show
Firmware upload option. Other small updates throughout
the manual. Changed kBit/s to kbit/s.
Updated Technical Specifications section. Added
proprietary discovery protocol to the Protocol parameter
in the Ethernet subsection. Added EMC Compatibility.
Immunity data. Added Vibration and Shock data in
General Specifications. Corrected Size. Updated
Dimensional Drawing.
2
2.xx
June 16,
2016
Olek
Bogush
Changed default values for Device IP Address, Device
Default Gateway, Remote IP Address and Remote Port.
Updated web interface.
Updated: 3 CONVERTER CONFIGURATION, 4
CONVERTER DIAGNOSTICS, 6 CONVERTER
DEPLOYMENT.
1A
1.xx
May 13,
2016
Olek
Bogush
Added Weight value and removed Vibration and Shock
values in Table 14. General Specifications.
Removed Compliances and Certification sub-sections in
8.4 General Specifications.