Section 2: Installing the AXIS 200
AXIS 200 User’s Manual
12
Caution!
The power supply delivered with your AXIS 200 is country specific.
Please check that the type of power supply you are using is correct
against the checklist on page 10.
Indicators
Snapshot Indicator
This indicator will flash on every occasion the AXIS 200 takes a
snapshot.
Power Indicator
This is normally lit while power is applied. If it is not lit, or it flashes,
there is problem with the AXIS 200 power supply.
Network Indicator
This flashes to indicate network activity.
Camera Lens
Wide angle lens with rotational-focus control. Refer to Appendix D -
Technical Specifications for complete specification.
Serial Number
This is located on the underside label of the AXIS 200. Please note
that the serial number of your AXIS 200 is identical to the Ethernet
address of the unit.
Control Button
This is used for multiple purposes, e.g. restoring the factory default
settings, adjusting the White balance, triggering CRON scripts. Refer
to the appropriate sections of the manuals.
To Next Page
Loading...
