Axis 200 - Snapshots

Section 5: Using the AXIS 200 AXIS 200 User’s Manual
34
Snapshots
Throughout this manual, a picture image generated by the AXIS 200
is referred to as a snapshot. The following information describes how
to take a snapshot and also defines the various types of snapshots file
that can be produced.
Taking Snapshots
For each snapshot taken a JPEG file is created and stored within the
internal memory of the unit.
Home Page
Snapshots
To produce a snapshot that is presented within the AXIS 200
Home page, simply enter the chosen Internet address or Host
name of your unit into the URL of your Web browser. This
initiates a camera access to produce a fullsize JPEG image.
Example:
This causes the AXIS 200 to generate a fullsize JPEG image. Each time
you reload the page, a new snapshot is displayed within the AXIS 200
Home Page.
Clean Snapshots
To generate clean snapshots that are not embedded within the AXIS
200 Home Page, you must specify the preferred snapshot type for the
target JPEG file within the URL of your Web browser. Snapshots can
be created in different file sizes, e.g. fullsize, halfsize etc.
Examples:
http://192.36.253.80
http://192.36.253.80/fullsize.jpg
http://192.36.253.80/halfsize.jpg