Axis 200 - Appendix F the RS232 Serial Port; Physical Connector

AXIS 200 User’s Manual Appendix F: The RS232 Serial Port
77
Appendix F The RS232 Serial Port
A 9 pin D-sub connector provides the physical connection for the
RS232 serial interface of the AXIS 200. This connector is provided for
connecting accessory equipment to the camera.
This appendix discusses the functionality of the RS232 serial interface
and how to how to set up a modem connection for the AXIS 200.
Physical connector
Pin assignment
A diagram of the connector and a pin assignment table for the AXIS
200 are detailed below.
Caution!
❏ GND on the serial port is not connected directly to the power
connector. Always use two independent power sources!
Connecting GND to the power connector will permanently
damage your AXIS 200.
Pin Function
1 NC
2 - RXD
3 - TXD
4 RTS
5 GND
6 CTS
7 RTS
8 NC
9 NC
2
4
1
9
5
3
8
7
6
Rear view of the AXIS 200