Axis 200 - Page 52

Section 5: Using the AXIS 200 AXIS 200 User’s Manual
50
7. Click Finish. The system then proceeds to build the Driver
information database and your connection dialog will then
subsequently appear in the Dial-Up Networking dialog.
Accessing the remote
AXIS 200
Follow this procedure to dial out to a remote AXIS 200.
1. Double click on the newly created icon to establish a modem
connection for your remote AXIS 200.
2. Enter your username and password and then click Connect. The
status dialogs "Dialing" and "Logging onto the network" are
presented prior to the display of a Connected to
<name>
dialog that
will confirm a successful connection.
You can now access the AXIS 200 by entering the name or Internet
address (URL) into the location field of your Web browser. Please
ensure that you are not using a proxy server (Netscape: Options
menu\Select Network\Proxies)
PPP Setup for Linux
Follow these instructions to connect a Linux host to the AXIS 200 to
your network using PPP:
1. Create a file containing the following lines:
2. Save the file as
.DIAL_AXIS200
within the
root
home directory.
This script dials out to
<phone number>
and then waits for a
connection before proceeding to the PPP negotiation phase.
ABORT BUSY ABORT 'NO CARRIER' '' ATDT<phone
number> CONNECT