Appendix B: The Parameter List
AXIS 200 User’s Manual
62
Camera specific
parameters
LOGO_X. = 10 Axis logo position in pixels, the horizontal coordinate.
LOGO_Y. = 10 Axis logo position in pixels, the vertical coordinate.
LOGO_SHOWN. = NO Enables Axis logo display.
CLOCK_X. = 1 Clock position in pixels, the horizontal coordinate.
CLOCK_Y. = 1 Clock position in pixels, the vertical coordinate.
CLOCK_SHOWN. = NO Enables clock display.
CLOCK_MODE. = AM/PM AM/PM or 24 hours time format.
Image appearance
parameters
COMPRESSION. = MEDIUM Determines snapshot compression and consequently file size.
BRIGHTNESS. = 5 Brightness control.
COLOR. = NORMAL Color control.
WHITE_BALANCE. = AUTOMATIC Control the white balance settings.
CONTRAST. = 5 Contrast control.
LIGHT_FRONT_LED. = YES Enables Snapshot indicator.
ROTATION. = NORMAL Snapshots can have varied orientation.
MIRROR. = NO Enables mirroring of image from right to left.
CACHE_TIME. = 0 Determines maximum cache period for snapshots,
e.g the same snapshot will displayed for all requests within a 3
seconds period.
DARKDETECT. = NO Enables black and white image generation for improved clarity
during low light conditions.
System Parameters
MODEM_TYPE. = Autodetect Modem or Null Modem.
SERIAL_MODE. = DISABLED Enables serial mode for ppp or zmodem access when set to
Full_Support, Inbound Only or Outbound Only.
SERIAL_BAUD. = 9600 Baud rate.
SERIAL_FLOW. = XON/XOFF Modem server operation mode.
MODEM_INIT. = String of commands to be sent to the modem for setup. Used for
non-US Robotics modems.
BUSY_REDIAL. = 0 Specifies how many additional attempts the AXIS 200 will make
to establish a connection in case the line is busy.
TIME. = The current time.
DATE_SERVER. = 0.0.0.0 Internet address of the server that provides the actual time and
date.
DATESYNC_PERIOD. = 0 The date and time will be automatically updated according to the
specified intervals.
DATESYNC_PROTOCOL. = TIME The synchronization protocol used. Time (serial port 37), Day-
time (serial port 13) or NTP (UDP port 123).
DATESYNC_TIME_ZONE. = 0 The time zone adjustment as number of hours +/- UTC.
Parameter name Value Description
To Next Page
Loading...
