Appendix D: Technical Specifications
AXIS 200 User’s Manual
70
Performance
The AXIS 200 uses a RISC CPU and hardware compression chips for
the JPEG transformation. A full size, full color JPEG file is created in
less than a second. However, inherent delays created by your network
and/or the Internet will also need to be added when considering the
overall time required to generate a picture.
Network Attachment
10baseT (RJ-45) twisted pair Ethernet.
Hardware
CPU: 32-bit RISC processor (ETRAX).
Flash PROM: 1 Mbyte
RAM: 1792 kbytes.
Optical Unit
• Manual focus: digital, 16 million colors, 24 bits, 0.2 in (0.5 cm)
to infinity
• Picture angle: 51 deg horizontal, 39 deg vertical
• Illumination range: 10 - 5 000 lux
• CCD: 1/4 in, 768 * 582 pixels
• Shutter speed: 1/50 - 1/10000 seconds
• Optical Focus: 4 mm focal length
(comparable to 35 mm on a regular camera)
Auxiliary
Input/Output
A Mini-DIN 8-pole external connector is provided for auxiliary
connections to the AXIS 200. The functionality of this connector is
fully discussed in “Appendix E - The Auxiliary IO Port” .
Serial Connector
A 9 pin D-sub connector provides the physical RS232 serial interface
to a modem server within the AXIS 200. The functionality of this
connector is fully discussed in “Appendix F - The RS232 Serial Port” .
Accessories
A camera mini-tripod that can be used standalone or mounted on a
wall. This is supplied with each unit and uses a standard camera
1/4 inch nut.
To Next Page
Loading...
