on-product warning
labels concerns
Warning labels are placed at specic locations on your Axis boat at the time of manufacture
to alert you to potential hazards that may not be obvious. These labels also indicate how to
avoid these hazards. Warning labels should never be removed and must remain
legible. If you suspect a label is missing, or if a label becomes damaged or
becomes unreadable (damaged, faded, or sun bleached), contact your dealer for
replacement.
It is the responsibility of the boat owner and occupants of the boat to
understand and comply with all warning labels and safety recommendations/
requirements. The driver of the boat and the boat owner are responsible for
the proper operation of the boat and the safety of the occupants of the boat.
Failure to adhere to and comply with the on-product warning labels and safety
statements labeled as dangers, warnings, and cautions that appear in this
manual can lead to serious injury, or death, as well as property damage. READ
AND ADHERE TO ALL WARNING PLATES AND LABELS from bow to stern, including
those that are installed inside the engine compartment, lockers, and underneath
seating.
warning
labels
and
locations
Axis
Owners
Manual
2019
Page 25
To Next Page
Loading...
Need help?
General
