About this Document
This manual is intended for administrators and users of AXIS Q6032
PTZ Dome Network Camera, and is applicable to firmware 5.41 and
later. It includes instructions for using and managing the product on
your network. Previous experience of networking will be of use when
using this product. Some knowledge of UNIX or Linux-based systems
may also be beneficial, for developing shell scripts and applications.
Laterversionsofthisdocumentwill be posted to the Axis website,
as required. See also the prod uct’ s online h elp, availa ble via the
web-based interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notic e . Axis Co m munications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the impli e d
warranties of merchant ability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this material. This product is only to be used for its in tended
purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology embodied
in the product describ ed in this document. In particular, and without
limitation, these intellectual property rights may in clude one or more
of the patents listed at http ://www.axis.com/patent.htm and one or
more additional patents or pending pa tent applica tion s in the U S and
other countries.
This product contains licensed third-party software. See the menu item
“About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source code is available
from http://developer.apple.com/darwin/projects/ bon jour/
Equipment Modifications
This equipment must be installed and used in strict acco rdance wit h the
instructions given in the user documentation. This equipment contains
no user-serviceabl e components. Unauthorized equipment chan ges or
modifications will invalidat e all applicable regulatory certifications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, Microso
ft,
Mozilla, Real, SMPTE, Q ui ckTime, UNIX, Windows, Windows Vista and
WWW are regis tere d trademarks of the respective holders. Java and
all Java-based trademarks and logos are trademarks or registe
red
trademarks of Oracle and/or its affiliates. UPnP
TM
is a certification
mark of the UPnP
TM
Implementers Corporation.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill applicable
standards for:
• Radio frequency emission when installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena w hen
installed according to the inst ructions and used in its intended
environment.
USA
This equipment has been tested using a shielded network cable (STP)
and fou nd to comp ly with th e limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If t his equipment does
cause harmful in terference to radio or television recep tion, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the rece i ving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit differe nt from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canada
This Cla ss B digita l apparatus complies w ith Canadian ICES-003.
Europe
This digital equipment fulfills the requirem ents for RF emis sion
according to the C lass B limit of EN 55022.
This product fulfills the requirements for immunity according
to EN 61000-6-1 residential, commercial and light-industrial
environments.
This product fulfills the requirements for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to
EN 55024 office and commercial environments.
Australia/New Zealand
This digital equipment fulfills the requirements for RF emission
according to the Class B limit of AS /N ZS CISPR 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사
용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
Safety
This product complies with EN/IEC 60950-1, Safety of Information
Technology Equipment.
The power supply used with this product sh all fulfill the requirements
for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS)
according to EN/IEC/UL 60950-1.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
• download use
r documentation and software updates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report pr
oblems to Axis support staff by logging in to your private
support area
• chat with Axis support staff (selected countries only)
• visi
t Axis Support a t www.axis.com/techsup/
Le
arn More!
Visit Axis learning center www.axi s.c om /academ y for useful trainings,
webinars, tutorials and guides.
To Next Page
Loading...
Need help?
General
