AXIS Q6032 PTZ Dome Network Camera
PTZ (Pan Tilt Zoom)
When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum
pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is
useful then the view is zoomed in on an object.
See the online help
for more information.
Controls
Panel Shortcut Command Buttons can be co nfigured to provide direct access to commands issued via the VA PIX® Application
Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page through
the Ctrl panel button, see
page 10
.
Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.
Note
Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.
Control Queue
The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons
appear in the Live Vie w page offering one view er exclusive control for a limited period of time. Other users will be placed in queue.
A user who belongs to a group (see
Users, on page 40
) with a higher PTZ priority can go before other users in the queue and
take control of the product. The order of pr iority is as follows:
1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be
removed from the queue 60 seconds after the last PTZ control command.
2. Event — The Axis product can be configuredtogotoapresetpositionwhen triggered by an alarm (see
Events, on page 34
).
The event will immediately be placed first in the queue except when an administrator is in control.
3. Operator — S ame as administrator but with lower priority
4. Guard Tour — A guard tour (see
page 28
) has PTZ control for an indefinite period of time. It may be overridden by an
operator, event or administrator. The guard tour will resume when higher priority groups leave the queue.
5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed
on to the next viewer i n queue.
Note
• The administrator can enable and di
sable PTZ controls for selected users.
• To identify d ifferent users in the viewer group, cookies must be enabled on the client.
30
To Next Page
Loading...
