EasyManuals Logo

Axis Q6032 PTZ User Manual

Axis Q6032 PTZ
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
AXIS Q6032 PTZ Dome Network Camera
Accessing the Product
Access from the Internet
Once connected, the Axis product is accessible o n your local network (LAN). To access the p roduct from the Internet you must
congure your network router to allo w incoming data trafc to the product. To do this, enable the NA T-traversal feat ure , which
will attem pt to automatically congure the router to allow access to the product. This is enabled from Setup > System Options >
Network > TCP/IP Ad vanced.
For more information, please s ee
NAT traversal (port mapping) for IPv4, on page 44
. See also AXIS Internet Dynamic DNS Service at
www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup
Set the Root Password
To gain access to the Axis product, you must set the password for the default administrator user root. This is done in the Congure
Root Password dialog, which appears when the product is accessed for the rst time.
To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an H TTPS
certicate. HTTPS (Hyp ertext Transfer Protocol over SSL) is a protocol used to encrypt trafc between web browsers and servers. The
HTTPS certicate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the rst dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Create self-signed certicate.
2. Provide the requested information and click OK.Thecerticate is created and the password can now be set securely. All
trafc to and from the product is encrypted from this point on.
3. Enter a password and then re-enter to conrm the spelling. Click OK. The password has now been congured.
Note
The default administrator user name root is permanent and cannot be deleted.
I f the password for root is lost, the product must be reset to the factory default settings. See
Reset to Factory Default
Settings, on page 49
.
8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis Q6032 PTZ and is the answer not in the manual?

Axis Q6032 PTZ Specifications

General IconGeneral
Optical Zoom35x
Digital Zoom12x
Pan Range360° endless
Operating Temperature-40 °C to 50 °C (-40 °F to 122 °F)
Video CompressionH.264, MJPEG
Network ProtocolsIPv4, IPv6, HTTP, HTTPS, FTP, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
PowerPoE+
Ingress ProtectionIP66
Day/NightYes

Related product manuals